ارسل ملاحظاتك

ارسل ملاحظاتك لنا







صيغ لإنتاج خلطات المزججات ذات الألوان الدافئة محليا

المصدر: مجلة العلوم الإنسانية
الناشر: جامعة السودان للعلوم والتكنولوجيا
المؤلف الرئيسي: عبدالله، حيدر عبدالقادر أبكر (مؤلف)
المجلد/العدد: مج19, ع3
محكمة: نعم
الدولة: السودان
التاريخ الميلادي: 2018
الشهر: سبتمبر
الصفحات: 1 - 14
ISSN: 1858-6724
رقم MD: 1019353
نوع المحتوى: بحوث ومقالات
اللغة: العربية
قواعد المعلومات: HumanIndex
مواضيع:
كلمات المؤلف المفتاحية:
صاهر | طلاء | حرق | Flux | Coat | Firing
رابط المحتوى:
صورة الغلاف QR قانون

عدد مرات التحميل

24

حفظ في:
المستخلص: تهدف الدراسة للتوصل إلى صيغ لخلطات الطلاءات الزجاجية الخزفية ذات الألوان الدافئة (الحمراء، البرتقالية والصفراء) بدرجات مختلفة من خلال إجراء التجارب المعملية. تمثل أهمية تلك الطلاءات ضرورة بغرض التنوع في ألوان الخزفيات لارتباطها بالمتطلبات الحديثة للخزف من حيث الجوانب الاستخدامية أو الجمالية. من جانب آخر يلاحظ أن معظم الخزفيات المحلية تزجج بطلاءات ذات ألوان باردة كالأزرق والأخضر بدرجاتها مع ألوان أخرى مما يدل على محدودية الألوان، وقد يكون ذلك بسبب قلة التجارب. تلك الطلاءات لا تتوفر محليا لكن بعض خاماتها متاحة. استخدمت في الدراسة خامات قياسية وأخرى محلية، أعتمد على مركبات الرصاص، البوراكس وزجاج جير الصودا كمساعدات صهر أساسية. الطلق، فلسبار البوتاسيوم ورماد الحطب استخدمت كمحسنات لخصائص الصهر، أما الكوارتز والكاولين فاستخدما لموازنة مكونات الخلطات. وللحصول على الألوان المطلوبة أستخدم أكاسيد كل من القصدير، التيانيوم، السلنيوم، الكادميوم والكروم كعينات للدراسة، مع اتباع المنهج التطبيقي لإجراء الدراسة. تم عمل الخلطات وفقا للمقادير الكمية بالنسب المئوية ثم حرقت في درجات حرارية مختلفة أعلاها 1120م. صدت نتائج الصهر وأخضعت لقياسات الصلادة، مقاومة كل من التآكل بالأحماض، الصدمات الحرارية، التشقق، التقشر. توصلت الدراسة إلى أن هناك إمكانية للحصول على الألوان المطلوبة وفقا لنقاء الخامات ونسبها في الخلطات ودرجات حرارة التسوية. بعض الأكاسيد اللونية التي استخدمت في الخلطات هي ذات سُمية عالية ولم تذوب كليا في المصهور الزجاجي وبعضها قد ذاب إلا أن بعض الخلطات المصهورة تستعيد تفاعلها مع القويات، عليه يُنصح بعدم استخدامها في تزجيج أواني الأكل والشرب.

The study aims to arrive at formulations for ceramic glaze mixtures bearing various degrees of warm colours) e.g: red, orange, and yellow) through conducting laboratory tests. The signifying of warm- color- glazes lies in diversifying ceramics and responding to the demand for modern artistic and utilitarian design. The study notes that most local ceramics are glazed with shades of cool colors like blue or green , which may be evidence of prevailing limitations due to lack of experimentation. Warm colored glazes are not offered locally, although some of their constituent materials are available. The study used standardized and local materials, relying mainly on lead compounds, borax, and black lime glass as the main flux. Materials used to improve the mixtures, fusing properties were talc, potassium feldspar, and wood ash. Quartz and kaolin were used to balance the mixtures. To achieve the desired colors, the oxides of tin titanium, selenium, cadmium and chrome were used as a samples of study, with a follow up practical method. The mixtures were made according to proportional percentages and then fired to various temperatures, the highest of which was 1120˚C. The results of fusing were observed and numerous tests were performed, including those measuring solidity, acid- erosion resistance, thermal shock, cracking, peeling, and the potential for reaction with alkaline substances. The study found that it is possible to obtain the desired colors, depending on the purity of materials, their percentages within the mixture, and the equalization of the firing temperature. Some of the coloring oxides used are highly poisonous and do not totally dissolve in fusion. Some of them dissolved, with alkaline substances after dissolved, but regained react ability with alkaline substances after finishing. Therefore these colors should not be used on vessels intended for food or drink.

ISSN: 1858-6724

عناصر مشابهة