ارسل ملاحظاتك

ارسل ملاحظاتك لنا







Grain Refinement of Cast Zamak 5 alloy by 0.1, 0.2 and 0.5 wt.% Mn

المصدر: مجلة جامعة الحسين بن طلال للبحوث
الناشر: جامعة الحسين بن طلال - عمادة البحث العلمي والدراسات العليا
المؤلف الرئيسي: Mostafa, Ahmad (Author)
مؤلفين آخرين: Al-Akailah, Audai (Co-Author) , Al-Qawabeh, Ubeidallah (Co-Author)
المجلد/العدد: مج5, ملحق
محكمة: نعم
الدولة: الأردن
التاريخ الميلادي: 2019
الصفحات: 1 - 15
DOI: 10.36621/0397-005-985-001
ISSN: 2519-7436
رقم MD: 1035799
نوع المحتوى: بحوث ومقالات
اللغة: الإنجليزية
قواعد المعلومات: EduSearch, AraBase, HumanIndex
مواضيع:
كلمات المؤلف المفتاحية:
Grain Refinement | Master Alloy | Microalloying | Zamak 5 Alloy | Strength Coefficient | Strain Hardening Exponent
رابط المحتوى:
صورة الغلاف QR قانون
حفظ في:
LEADER 02656nam a22002777a 4500
001 1773103
024 |3 10.36621/0397-005-985-001 
041 |a eng 
044 |b الأردن 
100 |9 561438  |a Mostafa, Ahmad  |e Author 
245 |a Grain Refinement of Cast Zamak 5 alloy by 0.1, 0.2 and 0.5 wt.% Mn 
260 |b جامعة الحسين بن طلال - عمادة البحث العلمي والدراسات العليا  |c 2019 
300 |a 1 - 15 
336 |a بحوث ومقالات  |b Article 
520 |b In this work, the effect of 0.1, 0.2, and 0.5 wt.% Mn additives on the grain size and microhardness number of Zamak 5 alloy was investigated. The Mn concentration was controlled by microalloying process. The master alloy composed of Al-10Mn wt.% was diluted to produce three microalloys. Microstructural investigation was carried out using an optical microscope and the Vickers hardness number was acquired using a microhardness tester. The grain size measurements were performed using ASTM standard test method and confirmed using the attached lens with the microhardness tester. The yield strength, strength coefficient and strain-hardening exponents were calculated from the true stress-true strain diagrams. The results showed that addition of 0.1, 0.2 and 0.5 wt.% Mn to Zamak 5 transformed the dendritic structure into more equiaxed structure with 15.5, 26.7 and 101.3 μm equivalent diameters, respectively. Furthermore, the microhardness number improved by 16.6%, 44.4% and 33.3% for the three microalloys, respectively. The calculated yield strengths and strength coefficients were consistent with the microhardness results. This improvement is an indication for property enhancing of Zamak 5 by small Mn additives. From the current study, the optimum Mn concentration that may significantly enhance the mechanical properties of Zamak 5 was 0.2 wt.%. 
653 |a الهندسة  |a السبائك  |a الزنك 
692 |b Grain Refinement  |b Master Alloy  |b Microalloying  |b Zamak 5 Alloy  |b Strength Coefficient  |b Strain Hardening Exponent 
773 |4 العلوم الإنسانية ، متعددة التخصصات  |6 Humanities, Multidisciplinary  |c 001  |f Mağallaẗ Ğāmiʿaẗ al-Ḥusayn bin Ṭalāl li-l-buḥūṯ  |l 985  |m مج5, ملحق  |o 0397  |s مجلة جامعة الحسين بن طلال للبحوث  |t Al - Hussein Bin Talal University Journal of Research  |v 005  |x 2519-7436 
700 |9 561440  |a Al-Akailah, Audai  |e Co-Author 
700 |9 561439  |a Al-Qawabeh, Ubeidallah  |e Co-Author 
856 |u 0397-005-985-001.pdf 
930 |d y  |p y  |q n 
995 |a EduSearch 
995 |a AraBase 
995 |a HumanIndex 
999 |c 1035799  |d 1035799 

عناصر مشابهة