ارسل ملاحظاتك

ارسل ملاحظاتك لنا







Bar Steel Corrosion Control in Seawater Using Cathodic Protection Technique

العنوان بلغة أخرى: التحكم في تأكل الحديد باستخدام تقنية الحماية المهبطية
المصدر: مجلة البيان العلمية
الناشر: جامعة سرت - نقابة أعضاء هيئة التدريس
المؤلف الرئيسي: Ahmied, Elftouri K (Author)
مؤلفين آخرين: Khalil, Mohamed Ahmed (co - auth)
المجلد/العدد: ع3
محكمة: نعم
الدولة: ليبيا
التاريخ الميلادي: 2019
الشهر: يونيو
الصفحات: 208 - 219
رقم MD: 1041278
نوع المحتوى: بحوث ومقالات
اللغة: الإنجليزية
قواعد المعلومات: HumanIndex
مواضيع:
كلمات المؤلف المفتاحية:
corrosion | corrosion rate | cathodic protection | seaware | current density | potentia
رابط المحتوى:
صورة الغلاف QR قانون

عدد مرات التحميل

6

حفظ في:
LEADER 05937nam a22002537a 4500
001 1778703
041 |a eng 
044 |b ليبيا 
100 |9 564213  |a Ahmied, Elftouri K  |e Author 
245 |a Bar Steel Corrosion Control in Seawater Using Cathodic Protection Technique 
246 |a التحكم في تأكل الحديد باستخدام تقنية الحماية المهبطية 
260 |b جامعة سرت - نقابة أعضاء هيئة التدريس  |c 2019  |g يونيو 
300 |a 208 - 219 
336 |a بحوث ومقالات  |b Article 
520 |a تم إجراء تحضير سطح العينات باستخدام الآلات الكهربائية، وتم توصيل الأسلاك الكهربائية بشكل جيد بالطرف العلوي لكلتا عينتي الاختبار، من أجل قياسات الجهد الكهروكيميائي. تم غمر كلتا العينات بشكل كامل في بيئة مياه البحر الطبيعية. تم إجراء الاختبار وفقًا لاختبار ASTM G31 للتآكل الغمر. تم تسجيل الإمكانات الطبيعية في وقت صفر باستخدام جهاز الجهد العالي المقاومة. تم إجراء الفحص البصري (VE)، صورة ضوئية على كل عينة اختبار، من أجل مراقبة منتجات التآكل وفيلم الودائع الجيرية على كل من عينات اختبار الفولاذ الطري المتآكل والمحمي بشكل كاثودي على التوالي. تمت مقارنة النتائج التي تم الحصول عليها ووجدت أنها مرتبطة بشكل جيد. وقد وجد أن عينة الاختبار غير المحمية بالكاثود تمت تغطيتها بالكامل بواسطة منتج التآكل، في حين وجدت عينة اختبار الصلب المحمية بالكاثود مغطاة بفيلم رواسب جليدية كثيفة ومتجانسة وخالية من أي علامة للتآكل كما هو متوقع. تم قياس كثافة تيار الحماية المطلوبة، على عينة اختبار الصلب المحمي كاثوديًا قبل وبعد تراكم الودائع الجيرية. تم قياس معدل التآكل وحسابه على كل من عينات اختبار الصلب المحمية بالكاثول وغير الكاثودي وعرضها. وفقا للنتائج التي تم الحصول عليها من جميع طرق المراقبة المستخدمة، يمكن استنتاج أن الحماية الكاثودية الكاملة قد تحققت لعينة اختبار الصلب المحمي كاثوديًا في مياه البحر الطبيعية الخلوية، ومعدل التآكل عن طريق طريقة قسيمة فقدان الوزن التي تم العثور عليها mpy3 انخفض إلى 0.25 ميغابايت فقط وهذا يعني أن كفاءة الحماية المحققة % بعد تطبيق CP كانت 91%. يمكن تقليل كثافة تيار الحماية المطلوبة للصلب الطري العاري في مياه البحر الطبيعية الثابتة إلى 82% من الثنايا، إذا تمت المحافظة على فيلم جيد من الرواسب الجيرية. 
520 |b The samples surface preparation has been conducted using electrical machining, well electrical wires have been connected to the upper ends of both test samples, for electrochemical potential measurements. Both samples have been fully immersed in natural seawater environment. Test was conducted according to ASTM G31 immersion corrosion testing. Natural potential has been recorded at zero time using high impedance potentiometer device. Visual examination(VE), optical photograph on each test sample have been conducted, in order to monitor the corrosion products and the calcareous deposit film on both freely corroded and cathodically protected mild steel test samples respectively. The obtained results have been compared and found to be well correlated. It was found that un cathodically protected test sample has been completely covered by corrosion product, whilst the cathodically protected steel test sample found to be covered with a dense and homogeneous calcareous deposit film and free from any sign of corrosion as expected. The required protection current densities, have been measured on cathodically protected steel test sample before and after calcareous deposit build-up. Corrosion rate have been measured and calculated on both catholically and un- cathodically protected steel test samples and presented. According to the obtained results from all used monitoring methods it can be concluded that full cathodic protection has been achieved to the cathodically protected steel test sample in aerated natural seawater, and the corrosion rate by means of weight loss coupon method found to be 3 mpy which reduced to only 0.25 mpy this means that the achieved protection efficiency % after application of CP was 91%. The required protection current density of bare mild steel in static natural seawater could be reduced to 82% folds, if a well film of calcareous deposit been maintained. 
653 |a الأسلاك الكهربائية  |a الآلات الكهربائية  |a الهندسة الكهربائية  |a القياسات الكهربائية  |a تقنية الحماية المهبطية  |a مستخلصات الأبحاث  |a الترجمة 
692 |b corrosion  |b corrosion rate  |b cathodic protection  |b seaware  |b current density  |b potentia 
700 |9 564263  |a Khalil, Mohamed Ahmed  |e co - auth 
773 |4 العلوم الإنسانية ، متعددة التخصصات  |6 Humanities, Multidisciplinary  |c 003  |l 003  |m ع3  |o 2094  |s مجلة البيان العلمية  |v 000 
856 |u 2094-000-003-003.pdf 
930 |d y  |p y  |q n 
995 |a HumanIndex 
999 |c 1041278  |d 1041278 

عناصر مشابهة