ارسل ملاحظاتك

ارسل ملاحظاتك لنا







تحضير ودراسة زيولايت ذو مواصفات حفازية من خامي السيليكا والبوكسايت

العنوان بلغة أخرى: Preparation and Studying of Zeolite with Catalytic Properties from Silica and Bauxite Ores Local
المصدر: مجلة التربية والعلم
الناشر: جامعة الموصل - كلية التربية
المؤلف الرئيسي: غزال، رغيد يوسف (مؤلف)
مؤلفين آخرين: يونس، تمارة عبدالسلام (م. مشارك)
المجلد/العدد: مج30, ع1
محكمة: نعم
الدولة: العراق
التاريخ الميلادي: 2021
الصفحات: 103 - 116
DOI: 10.33899/edusj.2020.127990.1104
ISSN: 1812-125X
رقم MD: 1202156
نوع المحتوى: بحوث ومقالات
اللغة: العربية
قواعد المعلومات: EduSearch
مواضيع:
كلمات المؤلف المفتاحية:
الزيولايت | خام السيليكا والبوكسايت | الطريقة الهيدرو حرارية | الخصائص الحفازية | Zeolite | Local Silica and Bauxite Ores | Hydrothermal Synthesis | Catalysts Properties
رابط المحتوى:
صورة الغلاف QR قانون
حفظ في:
المستخلص: The research included a method for preparing a zeolite by utilizing the components of clay mineral ores (silica and alumina). The two ores (/Local Silica and Bauxite) were studied through chemical analysis, X-ray diffraction and fluorescence. The results showed that they contained good quantities of these two substances, which were converted into sodium silicate and sodium aluminate, then the zeolite was prepared by hydrothermal method at (pH=11) in the presence of the structural directing agent (tri ethyl amine) then converted to the formula (H-zeolite) to improve its acidic properties, And then a number of measurements have been done for the prepared zeolite, which is a thermo gravimetric analysis (TGA) ,it showed that it contains amounts of moisture and crystallization water as well as its thermal stability at (700°C). As for the results of X-ray diffraction (XRD), it showed its good crystallization rate and its possession of a crystalline cube system, and the measurement of X-ray fluorescence (XRF) showed that it had a high percentage of silicon and aluminum, this indicates a balanced and equal interaction between these two materials when preparing of zeolite. The measurement of the scanning electron microscope (SEM) showed the high pore system and the fine particles that were around (18.17 nm), Finally the measurement of adsorption by the (BET) technique that explained the prepared zeolite have a high surface area (244.3766 m2/g).

اشتمل البحث على طريقة لتحضير زيولايت بالاستفادة من مكونات الخامات المعدنية الطينية (السيليكا والالومينا)، وقد درس الخامين (البوكسايت والسيليكا) من خلال التحليل الكيميائي للعناصر وحيود وفلورة الأشعة السينية وقد بينت النتائج احتواءهما على كميات جيدة من هاتين المادتين اللتين تم تحويلهما إلى سيليكات الصوديوم والومينات الصوديوم، وبعدها تم تحضير الزيولايت بالطريقة الهيدروحرارية عند(pH=11) وبوجود العامل الموجه للبنية (ثلاثي اثيل امين) ثم حول إلى الصيغة (H-zeolite) لتحسين خصائصه الحامضية وبعدها تم إجراء عدد من القياسات للزيولايت المحضر وهي التحليل الحراري الوزني(TGA) وتبين احتواؤه على كميات من الرطوبة وماء التبلور فضلا عن استقراره الحراري عند (700˚م) أما نتائج حيود الأشعة السينية (XRD) فقد بينت نسبة تبلوره الجيدة وامتلاكه نظاما بلوريا مكعبيا، وبين قياس فلورة الأشعة السينية(XRF) احتواؤه على نسبة عالية من السيليكون والألمنيوم وهو دليل على التفاعل المتوازن والمتكافئ بين هاتين المادتين عند التحضير، في حين أظهر قياس المجهر الإلكتروني الماسح (SEM) النظام المسامي العالي والحبيبات الدقيقة التي كانت بحدود (18.17 نانومتر)، وبين قياس الامتزاز بتقنية(BET) أن للزيولايت المحضر مساحة سطحية عالية كانت (244.3766 م2/غم).

ISSN: 1812-125X