ارسل ملاحظاتك

ارسل ملاحظاتك لنا







الرئيسية > Taguchi Grey Relational Analys...>الوصف

Taguchi Grey Relational Analysis of Mechanical Properties of Structural Steel Welding Made by Gas Tungsten Arc Welding

المصدر: مجلة جامعة بنغازي العلمية
الناشر: جامعة بنغازي
المؤلف الرئيسي: Elfallah, Saleh Suliman Saleh (Author)
المجلد/العدد: س37, ع1
محكمة: نعم
الدولة: ليبيا
التاريخ الميلادي: 2024
الشهر: يونيو
الصفحات: 37 - 47
ISSN: 2790-1629
رقم MD: 1476280
نوع المحتوى: بحوث ومقالات
اللغة: الإنجليزية
قواعد المعلومات: EduSearch, HumanIndex
مواضيع:
لحام القوس الكهربي | درجات الحرارة | مقاومة الصلابة
كلمات المؤلف المفتاحية:
Structural Steel | GTAW | Tensile Strength | Hardness | Grey-Taguchi Method
رابط المحتوى:
PDF (صورة)     
صورة الغلاف QR قانون
حفظ في:
المستخلص: Welding is a widely used method in industry for joining metals. Its applications include structures, fabrications, automobiles, oil and gas production, and others. Gas Tungsten Arc Welding (GTAW) is a common welding technique that produces higher-quality welds. Its application is mostly for stainless steel and aluminum welding due to its stable arc and focused heat source that produces a narrower heat-affected zone (HAZ). However, optimizing the welding process is a challenge for better-quality welds. This study utilizes the Grey-Taguchi method to optimize welding parameters for maximum tensile strength and hardness of structural steel welds. Structural steel, one of the most common materials involved in local industry, is normally welded by shielded metal arc welding (SMAW), while this work inspects the mechanical and microstructure properties of welds made by GTAW. The results presented higher tensile strength of weldments with decreased welding current. The V-groove-shaped weldments' tensile strength was higher than that of the samples with X-groove-shaped weldments. The Taguchi method has obtained that welding tensile strength is mostly influenced by the welding current, followed by groove shape, while welding speed has the least impact on the tensile strength. The grey relational analysis (GRA)concluded that groove shape had a higher impact on multi-response analysis. The welding factor's optimum settings are 170 A, groove shape V, and a welding speed of 150 mm/min.
ISSN: 2790-1629

عناصر مشابهة


© 2024 المنظومة. جميع الحقوق محفوظة.