العنوان بلغة أخرى: |
Effect of Certain Polymers on the Functional Properties of Blended Cellulosic Fabrics |
---|---|
المصدر: | المجلة العلمية لعلوم التربية النوعية |
الناشر: | جامعة طنطا - كلية التربية النوعية |
المؤلف الرئيسي: | الهنداوي، عادل جمال الدين إبراهيم (مؤلف) |
المؤلف الرئيسي (الإنجليزية): | Hendawi, Adel Gamaleldin |
مؤلفين آخرين: | داود، إيريني سمير مسيحة (م. مشارك) , حمودة، رانيا محمد أحمد (م. مشارك) , هيبه، عزة صبحي محمود (م. مشارك) , ربيع، إيمان حامد محمود (م. مشارك) |
المجلد/العدد: | ع14 |
محكمة: | نعم |
الدولة: |
مصر |
التاريخ الميلادي: |
2021
|
الشهر: | ديسمبر |
الصفحات: | 1 - 27 |
ISSN: |
2735-3893 |
رقم MD: | 1500268 |
نوع المحتوى: | بحوث ومقالات |
اللغة: | العربية |
قواعد المعلومات: | EduSearch |
مواضيع: | |
رابط المحتوى: |
الناشر لهذه المادة لم يسمح بإتاحتها. |
المستخلص: |
يهدف هذا البحث إلى دراسة أثر المعالجة ببعض أنواع من البوليمرات علي الخواص الوظيفية للأقمشة السليلوزية المخلوطة، للوصول إلى أفضل المعايير القياسية المعالجة الأقمشة السليلوزية المخلوطة وتحديد انسب (نوع مادة المعالجة، تركيز مواد المعالجة، نوع خامة خيط اللحمة) ولتحقيق هدف البحث تم استخدام خامات طبيعية حيث تم استخدام ثلاث خامات لخيط اللحمة (فسكوز ۱۰۰% ، فبران ۱۰۰%، قطن 100%) نمرة (30/1) وكانت كثافة خيط اللحمة ٦٨ حدفة/ البوصة أما خيوط السداء كانت ثابتة لجميع الأقمشة المنتجة تحت البحث وهي ۱۰۰% قطن نمرة 40/1 وتم تنفيذ الأقمشة المنتجة تحت البحث بشركة مصر للغزل والنسيج بالمحلة الكبرى علي نول رابير دوبي عرضه ۱۹۰ سم بتركيب نسجي (كريب بطريقة الزحف والدوران على قاعدة مبرد 2/3) وتم تنفيذ الأقمشة المنتجة تحت البحث طبقا للمواصفات والمتغيرات المحددة وتمت المعالجة بالبوليمرات (كاربوكسي ميثيل السليلوز CMC، عديد فينيل الكحول PVA) بتركيز (٢، ٤ ، 6 جم/ لتر) لكل مادة على حده مع إضافة عامل مساعد (حمض الستريك بتركيز ٠,٥ جم/ لتر و Nan Silver بتركيز 10 سم/ لتر). بعد ذلك تم إجراء بعض الاختبارات المعملية على الأقمشة المنتجة وتم تحليل النتائج إحصائياً بإستخدام تحليل التباين للحصول علي معاملات الإرتباط ومعادلات خط الانحدار. وتوصل البحث إلي أن :- 1- القماش المنتج من خامة خيط اللحمة فسكوز ۱۰۰% بتركيب نسجى كريب ومادة المعالجة كاربوكسي ميثيل السليلوز CMC بتركيز ٤ جم/ لتر هو الأفضل بالنسبة لجميع الخواص المقاسة وذلك بمساحة مثالية 532.78 وبمعامل جودة 88.80%. 2- بينما كان القماش المنتج من خامة خيط اللحمة قطن ۱۰۰% بتركيب نسجى كريب ومادة المعالجة عديد فينيل الكحول PVA بتركيز ٤ جم/ لتر هو الأقل بالنسبة لجميع الخواص المقاسة وذلك بمساحة مثالية ٤١٠,٠٦ وبمعامل جودة ٦٨.٣٤%. This research aims to study the impact of treatment with certain types of polymers on the functional properties of blended cellulosic fabrics, to reach the best standards for the treatment of blended cellulosic fabrics and to determine the most appropriate (type of processing material, concentration of processing materials, type of flesh strand ore) and to achieve the objective of the research the research materials where there were three raw materials for the weft (cotton 100 %, viscose 100 % and fibron 100 %). Nimra (30/ 1) and the density of the weft was 68 horsepower/ inch. and the warp yarn were fixed to all fabrics produced under research, which is 100 % cotton and fabrics produced under research at (Misr spinning and weaving company) in el mahalla elkobra were implemented on the lap of " rabier dubey " width 190 cm. And three textile structure " crepe manner crawling and rotation on file cooler 2/3, the tissue is reversed ".The clothing fabrics produced under the research According to the specified spacifications and variables the treatment was carried out with polymers (carpoxy methyl cellulose,polyvinyl alcohol) at a concen tration of (2,4,6g/l) for esch sypstance separately, without adding a catalyst(citric acid at a concentration of 0,5g/l and nano silver at a concentration of 10cm/l) after the, som esome laporatory tests were performed on the produced faprics, and the results were analyzed statistically using an analysis of variance to optain the correlation coafficients and regression line equations; 1-the fabric brodused from the raw material of the weft yarn, viscose100%, with the composition of crepe weave, and the treatment material carboxy methyl cellulose at a concentration of 4g/l is the pest for all the measured properties with an ideal area of 532,78 and a quality factor of 88,80%. 2-whereas the cloth was produced from the raw material of the cotton 100% yarn with a crepe weave composition, and the treatment material was poly vinyl alcohol, at a concentration of 4g/l, which was the lowest in relation to all the measured properties with an ideal area of 410,06 and a quality factor of 68,35%. |
---|---|
ISSN: |
2735-3893 |