ارسل ملاحظاتك

ارسل ملاحظاتك لنا







Measurement of Photon Density Affecting on Different Tested Phases By Spacing Technique

العنوان بلغة أخرى: قياس الكثافة النيوترونية المؤثرة على الأطوار المختلفة باستخدام تقنية الأبعاد المحتملة
المصدر: مجلة كلية المأمون
الناشر: كلية المأمون الجامعة
المؤلف الرئيسي: محمود، عباس على (مؤلف)
المجلد/العدد: ع27
محكمة: نعم
الدولة: العراق
التاريخ الميلادي: 2016
الصفحات: 320 - 335
DOI: 10.36458/1253-000-027-015
ISSN: 1992-4453
رقم MD: 853382
نوع المحتوى: بحوث ومقالات
اللغة: الإنجليزية
قواعد المعلومات: HumanIndex, EcoLink, IslamicInfo
مواضيع:
كلمات المؤلف المفتاحية:
الكواشف | مصادر اشعة كاما | الترتيب | المشاهد | التضعيف | النظائر | Detectors | Gamma sources | Arrangement | Views | Attenuation | Isotopes
رابط المحتوى:
صورة الغلاف QR قانون
حفظ في:
المستخلص: In this study we design a machine equipped with two sources generated gamma rays with different intensity, these sources are cobalt-60 and cesium-137. A non-invasive measurement technique is used in this system and applied to the core of an experimental reactor, this system is linked to a complex and integrated computer. Gamma ray machine consists of thirty sodium iodide detectors distributed equally on each side of source. The main objective of this research is to get the best image with the highest sensitivity and the lowest degree of resolution for the working phases inside the core as shown in Figures (1 and 2), also as shown in Figures of results (6,7,12,13). Detectors are installed with different angles and distances in coordination with the radioactive sources location to get the necessary quantity of photons to give the best results. This research was conducted at Missouri University of Science and Technology during the period of full-time sabbatical under supervision of the head of the department of the Chemical, Biological, and Nuclear Engineering.

تم فى هذا البحث تصميم ماكنة مجهزه بمصدرين لتوليد اشعة كاما مختلفي الشده وهما الكوبلت-60 والسيزيوم-137. يستخدم هذا النظام للتصوير المقطعى المزدوج لقلب مفاعل تجريبي مرتبط بنظام حاسوبي معقد ومتكامل. الماكنة تتكون من ثلاثين كاشفا من نوع (يوديد الصوديوم) موزعه بالتساوى مقابل كل مصدر. الهدف الرئيس من هذا البحث هو للحصول على أفضل صوره بأعلى درجة من الضوح وبأقل درجة من التشويش للأطوار المختلفه العاملة فى قلب المفاعل وكما نلاحظ من خلال الأشكال (1و2) وكذلك من خلال النتائج كما فى الأشكال (6,7,12,13) تم تثبيت الكواشف بزوايا ومسافات محدده بالتنسيق مع موقع المصادر المشعه للحصول على الوفرة الفوتونيه اللازمة لا عطاء أفضل النتائج. تم إجراء هذا البحث فى جامعة ميزوري للعلوم والتكنلوجيا خلال مدة التفرغ العلمى وتحت اشراف رئيس قسم الهندسة الكيمياوية والبيولوجية والنووية.

ISSN: 1992-4453

عناصر مشابهة