ارسل ملاحظاتك

ارسل ملاحظاتك لنا







دراسة مقارنة بين الأسلوب اليدوي والبرامج ثلاثية الأبعاد 3D في رسم النموذج المسطح لإنتاج البنطلون النسائي

العنوان بلغة أخرى: A Comparative Study on Manual And Computerized 3D Programs In Drawing Flat Pattern For Female Trousers
المصدر: مجلة التصميم الدولية
الناشر: الجمعية العلمية للمصممين
المؤلف الرئيسي: فرج، فداء بنت خضر بن خالد (مؤلف)
مؤلفين آخرين: دعبس، رانيا مصطفي كامل عبدالعال (م. مشارك), سالم، شادية صلاح حسن متولي (م. مشارك)
المجلد/العدد: مج8, ع1
محكمة: نعم
الدولة: مصر
التاريخ الميلادي: 2018
الشهر: يناير
الصفحات: 243 - 253
DOI: 10.21608/IDJ.2018.86306
ISSN: 2090-9632
رقم MD: 1165271
نوع المحتوى: بحوث ومقالات
اللغة: العربية
قواعد المعلومات: HumanIndex
مواضيع:
كلمات المؤلف المفتاحية:
النماذج | النموذج المسطح | البرامج ثلاثية الأبعاد 3D | البنطلون النسائي | Models | Flat Pattern | 3D Programs | Female Trousers
رابط المحتوى:
صورة الغلاف QR قانون

عدد مرات التحميل

35

حفظ في:
المستخلص: هدف هذا إلى التعرف على فاعلية البرامج ثلاثية الأبعاد (3D) في رسم النموذج الأساسي لإنتاج البنطلون النسائي من خلال المقارنة مع الأسلوب اليدوي في رسم النموذج للوصول إلى عينات تامة الضبط في أقل زمن وأقل تكلفة. ولتحقيق أهداف الدراسة اعتمدت الباحثة على المنهج التجريبي حيث استهدف دراسة مقارنة بين أسلوبين من أساليب إنتاج نموذج البنطلون النسائي هما الطريقة المسطحة وبرامج ثلاثية الأبعاد (3D)، وتكونت عينة الدراسة من (12) من النساء العاملات، (6) منهن عاملات في جامعة تبوك و(6) منهن في جامعة الملك عبد العزيز، وتم استخدام مقياس تقدير للنماذج المنفذة، واستمارة حساب التكلفة، وبطاقة ملاحظة كأدوات للدراسة.
وأظهرت النتائج وجود فروق ذات دلالة إحصائية في متوسط نسب الضبط في نموذج البنطلون النسائي المنفذ بالأسلوب اليدوي والمنفذ بالبرنامج ثلاثي الأبعاد (3D)، ووجود فروق ذات دلالة إحصائية في متوسط نسب الضبط في نموذج البنطلون النسائي المنفذ بالبرنامج ثلاثي الأبعاد (3D) والمنفذ بالبرنامج ثلاثي الأبعاد (3D) المعدل، ووجود فروق ذات دلالة إحصائية في متوسط نسب الضبط في نموذج البنطلون النسائي المنفذ بالأسلوب اليدوي والمنفذ بالبرنامج ثلاثي الأبعاد (3D) المعدل، ووجود فروق إحصائية بين تكاليف إنتاج البنطلون النسائي المنفذ بالأسلوب اليدوي والمنفذ باستخدام البرامج ثلاثية الأبعاد (3D) لصالح تكاليف إنتاج البنطلون النسائي المنفذ بالبرامج ثلاثية الأبعاد (3D)، وجود فروق إحصائية بين متوسط الوقت المستغرق إنتاج البنطلون النسائي المنفذ بالأسلوب اليدوي و المنفذ باستخدام البرامج ثلاثية الأبعاد (3D) لصالح الوقت المستغرق في إنتاج البنطلون النسائي المنفذ بالبرامج ثلاثية الأبعاد (3D). وفي ضوء نتائج الدراسة تم تقديم عدة توصيات، ومنها: تطوير وتحديث المناهج التي تدرس لطالبات الملابس والنسيج لمواجهة التطور الدائم في حلول مشكلات إنتاج وتنفيذ الملابس، والاهتمام بقياس فاعلية البرامج ثلاثية الأبعاد (3D) في رسم المنتجات الأخرى.


This aimed to identify the effectiveness of three-dimensional (3D) programs in drawing the basic model for the production of women's trousers by comparing with the manual method in drawing the model to reach fully controlled samples in the least time and lowest cost. To achieve the study's objectives, the researcher relied on the experimental method, which aimed to a comparative study between two methods of producing the women's trouser model, namely the flat method and three-dimensional (3D) programs. The study sample consisted of (12) working women, (6) of them worked at the University of Tabuk, and (6) at King Abdulaziz University. Assessment scale for the implemented models, a cost calculation form and a notecard were used as study tools.
The results showed that there were statistically significant differences in the average adjustment ratios in the women's pants model executed by the manual method and executed in the three-dimensional (3D) program. There were statistically significant differences in the average adjustment rates in the women's pants model implemented in the three-dimensional program (3D) and executed in the three-dimensional (3D) modified program. There were statistically significant differences in the average control ratios in the model of women's trousers executed by the manual method and implemented by the modified (3D) program. And there were statistical differences between the costs of producing women's trousers executed by the manual method and those implemented using three-dimensional (3D) programs in favor of the costs of producing women's trousers executed by the three-dimensional (3D) programs, and there are statistical differences between the average time taken to produce women's trousers executed by the manual method and those executed using three-dimensional (3D) programs In favor of the time taken to produce the women's trousers executed in 3D programs. In light of the results of the study, several recommendations were made, including developing and updating the curricula taught to students of clothing and textiles to face the permanent development in solutions to the production and implementation of garment problems, and attention to measuring the effectiveness of three-dimensional (3D) programs in drawing other products.
This abstract translated by Dar AlMandumah Inc. 2021


ISSN: 2090-9632