ارسل ملاحظاتك

ارسل ملاحظاتك لنا







الأشكال الأرضية لطار النجف وإمكانية استثمارها

العنوان بلغة أخرى: Tar Al Najaf and the Possibility of Investing it of the Geomorphic Features
المصدر: آداب الكوفة
الناشر: جامعة الكوفة - كلية الآداب
المؤلف الرئيسي: هريبد، ستار جابر (مؤلف)
مؤلفين آخرين: الزاملى، عايد جاسم حسين (م. مشارك)
المجلد/العدد: مج14, ع54
محكمة: نعم
الدولة: العراق
التاريخ الميلادي: 2022
التاريخ الهجري: 1444
الشهر: كانون الأول
الصفحات: 133 - 166
DOI: 10.36317/0826-014-054-007
ISSN: 1994-8999
رقم MD: 1347410
نوع المحتوى: بحوث ومقالات
اللغة: العربية
قواعد المعلومات: AraBase
مواضيع:
كلمات المؤلف المفتاحية:
طار النجف | الأشكال الأرضية | الطار | استثمار طار النجف | Tar Alnajaf | The Geomorphic Features | The Tar | The Investment of Tar Najaf
رابط المحتوى:
صورة الغلاف QR قانون
حفظ في:
المستخلص: يهدف البحث إلى دراسة الأشكال الأرضية التي تقع ضمن طار النجف، والذي يقع في الجهة الشمالية من محافظة النجف، وهو ذو امتداد شمالي غربي -جنوبي شرقي. بلغ طوله حوالي 68 كم، وكان أعلى ارتفاع فيه ١٣٠ متر فوق مستوى سطح البحر في الجهة الغربية. يتلاشى ارتفاعه كلما اتجهنا باتجاه الجنوب الشرقي حتى يصل 20 متر فوق مستوى سطح البحر وعلى وجه التحديد عند مدينة الحيرة. يعد هذا الطار جرفا صخريا حادا في أغلب أجزائه، البعض منها تصل زاوية انحدارها إلى ٩٠ درجة، تراجع هذا الجرف الصخري نتيجة نحت المياه لجهاته السفلى خلال العصور المطيرة. كما أن هذا الجرف الحاد يتحول إلى تلال متناثرة كلما اتجهنا نحو جهته الغربية، وفضلا عن ذلك يهدف البحث إلى دراسة التكوينات الصخرية للزمن الثلاثي والمتمثلة بتكويني إنجانة والدبدبة وترسبات الزمن الرباعي والمتمثلة بترسبات الجبكريت، ودراسة المناخ منذ الزمن الرباعي حتى الوقت الحالي، وتم دراسة الأشكال الأرضية التي كونتها العمليات الجيومورفولوجية كالتجوية والتعرية المائية والتعرية الريحية في التكوينات الصخرية سابقة الذكر والمتمثلة بحركة الفتات الصخري (الزحف، التساقط الصخري، الانزلاقات الصخرية)، وأشكال التعرية المائية (الحافات الصخرية، الجروف، السفوح، المنحدرات، الميسا، البيوت، الشواهد)، وأشكال المياه الجوفية فضلا عن أشكال التعرية الريحية. ودراسة المواد الأولية (الرمل والحصى والجبس) المترسب ضمن طار النجف، والصناعات الإنشائية التي تعتمد على هذه المواد بشكل رئيس، إذ تعد ترسبات تكوين إنجانة الحاوية على الحجر الرملي، وترسبات تكوين الدبدبة المتمثلة بالترسبات الريحية الرقيقة، فضلا عن الترسبات الجبسية ضمن ترسبات الجبكريت، مادة أولية للصناعات الإنشائية، سواء كانت لصناعة الكونكريت الجاهز أو صناعة الكاشي أو الطابوق الإسمنتي (البلوك) أو الجص أو غيرها من الصناعات الإنشائية، وتناول البحث أماكن صناعية مقترحة تتوسط منطقة الدراسة، تكون مكملة أو بديلة للصناعات القائمة فعلا في مدينة النجف.

The research aims to study the landforms that are located within Tar Najaf. Which is located in the northern part of Najaf Governorate, and it has a northwest-southeast extension, its length is about 68 km. Its highest altitude was 130 meters above sea level on the western side. Its height vanishes as we head southeast until it reaches 20 meters above sea level, specifically at the city of Al-Hira. This tyre is a steep rocky cliff in most of its parts, some of which have a slope angle of 90 degrees. This rocky cliff has retreated as a result of water sculpting its lower sides during the rainy ages. Also, this steep cliff turns into scattered hills as we head towards its western side. In addition, the research aims to study the rock formations of the Tertiary period, represented by the formations of Injana and Al- Dibbeh, and the deposits of the Quaternary time, which are represented by the gypsum deposits. And the study of climate from the Quaternary period to the present time, The land forms formed by geomorphological processes such as weathering, water erosion and wind erosion in the aforementioned rock formations were studied. Which is represented by the movement of rocky crumbs (crawling, rockfall, rockslides), and forms of water erosion (rock edges, cliffs, slopes, cliffs, mesa, houses, tombs), And forms of groundwater as well as forms of wind erosion. And the study of the raw materials (sand, gravel and gypsum) deposited within the Najaf region, and the construction industries that depend on these materials mainly. As the deposits of the formation of Anjana containing sandstone, And the deposits of the formation of Al-Dibbah, represented by the thin wind sediments, In addition to the gypsum deposits within the gypsum deposits, raw material for construction industries, Whether it is for the manufacture of ready made concrete, the manufacture of the cache, the cement bricks (blocks), plaster, or other construction industries, The research dealt with suggested industrial places in the middle of the study area, that would be complementary or alternative to the industries already existing in the city of Najaf.

ISSN: 1994-8999